Feeding Drawing Mechanism-AAC Autoclave
It is special equipment (see the picture) for hooking and pushing autoclave on the steam raising line.
Main technical parameter:
1.The length of the drawing mechanism can be made base on customer's requirement.
3, Reducer (pre-curing)
Output rotate speed:12.7r/min
It is composed of drive sprocket , driven sprocket, tension pulley. The trolley of the hook is composed of bearing, rolling wheel, hook body and shaft, etc.
Switch on the power supply, the motor rotate to drive the sprocket, and the wiring line goes through the pulley to drag the drawing mechanism moving on the guide rail.
Trial running and maintenance:
The hanger trolley runs stably on the guide rail.
Add Colloidal graphite oil on the wheel every week.
1.Clean the obstacle on the guide rail and the both sides.