AAC Autoclave-Separator
Recommended application:
Separator used for out of autoclave section,The bricks after steaming will have certain sticky ,Use separator to separate blocks.
Working principle:
When finished product transport to the bottom of separator to separate the finished products layer by layer from up to down (upper separating part clamp tightly up finished product block,lower layer separator clamp tightly lower finished product block,finished this,extend separator oil cylinder, to separate upper separating parts and lower layer separating parts, then separate block,and so on.
Features:
AAC blocks easily stick together again after steamed,separator automatically separate it layer by layer before packing.
Eliminate waste blocks,substandard blocks caused by stick,Promise packing running normal at the same time.
Separator can clamp tightly blocks equally,average error small,to make sure separating quality.
Separator hydraulic system design every clamper alone control system,can freely choose clamping and separating position.
Separator clamping power can freely adjust,Automatic stop and add pressure when reach to setup clamping power ,keep clamping ,Suitable of different strength levels blocks.
Separator speed,distance and separating power can adjust based on use situation.
Separator lifting drived by hydraulic ,finished by transmission device and abutment beam,transmission device has imported encode,can accurately control the block lifting position;lifting speed and powder can adjusted based on request.
Separator setup have automatic and manual operation ways,on hydraulic transmission oil recycle tube setup coarse, fine filter,Automatic alarm when local clogging occurs in the filter,automatic emergency treatment.
Packing & Shipping:
Package conforms to the requirements of customs.
Structure:
AAC block separator is composed of cross beam,vertical beam,separating parts and lifting trolley .
Cross beam,vertical beam,separating parts and lifting trolley are made of shape steel,assembled by steel plate.
Power provided by hydraulic station.
After-sales service:
1.Provide engineers abroad installation and commissioning service.
2.Held online or site training for workers to ensure the safe operation.
3.Our expert will answer any inquiry within 24-48 hours and it will be solved as soon as possible.
4.We supplies the complete technical documents and the relative drawings of the electric components which were written in Chinese and English.
5.Service is available lifelong.
Our products are sold all over the world, you can rest assured.
