Slurry mixer for AAC Line
Application:
The Six-cube Slurry Mixer (refer to the photo and drawing) is especially used to mix the lime, Steam Aerated concrete arenaceous powder, water completely to form slurry.
Recommended application:
In AAC production line, mixer mainly for materials preparation.
different specifications, different uses.
6m³ mixer used for slurry pool, sand/flyash slurry preparation, waste slurry under pouring mixer.
20m³ mixer used for slurry preparation besides ball mill, waste slurry pit besides cutting machine.
50m³ 60m³ 100m³ used for sand/flyash preparation.
Specification:
| No | Name | Power(KW) | Pool/Tank Size | |
| 1 | 6³Mixer | 5.5 | φ2000X2000 | |
| 2 | 20³Mixer | 11 | φ3000X3290 | |
| φ3600X2000 | ||||
| 3 | 50³Mixer | 18.5 | φ3600X5000 | |
| 4 | 60³Mixer | 18.5 | φ4000X4000 | |
| 5 | 100³Mixer | Rotary type | 18.5+2.2 | φ6000X4000 |
| 6 | Direct Type | 22 | φ6000X4000 | |
Features&Advantages:
1.Simple installation.
2.Seldom vulnerable parts.
3.All reducer are gear reducer,long use time, not easy break.
Maintenance and repair:
1.Maintenanc
Please make sure that there is no slurry in the basin before stop working. Otherwise, the mixer may be damaged because of slurry sedimentation
Please check lubricating oil of the reducer and to fill timely. Normally, lubricating oil is expected to be changed after six months
To clean the mixer and its basin after every day’s work.
2.Repair
Please check all fasteners to avoid any possible loose and change worn parts.
Our products are sold all over the world, you can rest assured.
