Payment & Shipping Terms:
SANKON Hydro Dipping Tank,
CE Hydro Dipping Tank
Dipping tank for the Lightweight Wall Panel Machine
The dipping tank is composed of a carrier,a transmission component and a traveling mixing component.① The carrier is formed into cylinder shape by bending deformation and welding of 10mm steel plate ;② The transmission component is composed of motor, reducer, transmission shaft, coupling, sprocket, chain, etc. its operation is controlled by electric box ;③ The traveling mixing component is composed of motor, reducer, transmission shaft, coupling, wheel, mixing blade, etc. its operation is controlled by electric box.
Anti-corrosion drying of rebar mesh Semi-finished rebar mesh is hung on the single-girder traveling crane to be immerged in the anti-corrosion solurion.
a.The Dipping tank runs stably after the motor starts, and there is no abnormal sound in the reducer, run and return it for half a hour.
b.Load test run, drying box load hook, steel mesh, run for half an hour according to the empty car trial procedures and requirements.
Clean the dust after each shift, and add lubricant oil to the wheel before the production.
a.Check the wheel and transmission parts each month and replace the destroyed parts.
b.Check the wiring and electrical parts very 6 months, and add oil to the reducer.
c.Wash all transmission parts, replace the worn parts and add lubricant one per year.
Packing & Shipping:
Package conforms to the requirements of customs.
1.Provide engineers abroad installation and commissioning service.
2.Held online or site training for workers to ensure the safe operation.
3.Our expert will answer any inquiry within 24-48 hours and it will be solved as soon as possible.
4.We supplies the complete technical documents and the relative drawings of the electric components which were written in Chinese and English.
5.Service is available lifelong.
Contact Person: admin