Payment & Shipping Terms:
|Name:||Cutting Machine||Rated Voltage:||380V|
SANKON Building Materials Technology Co. is a one stop solutions provider for autoclaved aerated concrete (AAC) production equipment including complete AAC production lines.
We manufacture a wide range of building material machines, including block making machines, concrete panel machines, dry mortar machines, and more.
Our main products include AAC block production line,ALC panel production line,ALC panel production installation of cinstruction equipment and their matched equipment.
JQF-6 Autoclaved aerated concrete cutting machine is one of JQF-4.25 series product. It is a constant cutting developed from moving cutting. The machine is composed of longitudinal cutting machine and transverse cutting machine trolley and guid rail. And, the horizontal cutting machine has been modified from fixed swing, spring tension to frame swing and cylinder tension, and there is contact surface on the frame swing, which increase the service life, and remove the deform defect by the spring tension, it improves the cutting accuracy.
When the casting blank is lift to the cutting trolley after turn 90° and de-mold, it will be moved to the work station of longitudinal cutting machine and transverse cutting machine to have six surface cutting for the casting blank. First, it will be cut 4 surfaces horizontally by the longitudinal cutting machine, and then it will be moved to the transverse cutting machine by the first trolley, and then cut vertically by the transverse cutting machine, and then it will be moved by the first trolley under the hanger which will lift it to the steam curring cavity and go back after the curring, meanwhile the cutting waste will be moved to the waste slurry mixing tank. It takes around 5 minutes to finish the cutting, the second trolley works together after the first trolley, it will move the cutting waste to the tank when the first trolley goes forward.
Single machine function
1.Longitudinal cutting machine: It cut 4 surface for the casting blank (2 sides and upper and lower horizontal surface), the blank size after cutting is 600mm wide and 1200mm high, and it will be cut horizontally base on product required, and it will mill the tenon on the both end.
2.Transverse cutting machine: It is used to cut the both end of the casting blank, the length will be determined base on the requirement, and it will cut vertically from upper to lower base on the thickness requirement.
3.Trolley: It is used to move the casting blank to the cutting work station and move the cutting waste to the mixing tank.
4.Waste clean trolley: It is a special trolley to move the cutting waste to the waste slurry mixing tank.
5.The guid rail is used only for the trolley running.
Longitudinal cutting machine
Max outside size
Length:10410mm Width:2870mm Height:2550mm
Weight:According to the actual production
Transverse cutting machine
Max outside size
Length:6900mm Width:3155mm Height:4000mm
Maintenance and repair
Clean the waste in each part after the each production shift.
Remove the dust on the cutting wiring, scale, chain wheel and chain.
Loose the cutting wiring
Add oil for the reducer per week
Check the oil level of the reducer, and add it on time if it is lower the level.
Chain wheel uses 90# industrial wheel oil
KW series reducer uses 90# industrial wheel oil
Tighten the parts and replace each destroyed parts.
Contact Person: admin