AAC block advantages:
1.Improved thermal efficiency reduces the heating and cooling load in buildings.
2.Porous structure allows for superior fire resistance.
3.Workability allows accurate cutting, which minimizes the generation of solid waste during use.
4.Resource efficiency gives it lower environmental impact in all phases of its life cycle, from processing of raw materials to the disposal of waste.
5.Light weight saves cost & energy in transportation, labor expenses, and increases chances of survival during seismic activity.
6.Environmentally Friendly: When used, it helps to reduce at least 30% of environmental waste as opposed to going with traditional concrete. There is a decrease of 50% of greenhouse gas emissions. When possible, using autoclaved aerated concrete is a better choice for the environment.
7.Energy Saver: It is an excellent property that makes it an excellent insulator and that means the interior environment is easier to maintain. When it is used, there is usually not a need for any supplementary insulation
Ball mill
Description:
The ball mill is the key equipment to crush the material after it is broken.Aerated brick ball mill is widely used in cement, Portland products, new building materials, refractories, chemical fertilizers, black and non-ferrous metal dressing and glass ceramics and other production industries, for a variety of ores and other grindable materials dry or wet grinding.
Working principle of ball mill:
This machine is a horizontal cylindrical rotating device, with outer gear transmission. It is a two-compartment, lattice-type aerated brick ball mill.The material enters the first bin of the mill uniformly by the feeding device through the feeding hollow shaft screw. There are stepped lining plates or corrugated lining plates inside the bin, and steel balls of different specifications are installed. Centrifugal force is generated by the rotation of the barrel to bring the steel balls to a certain height and then they fall down, resulting in a heavy blow and grinding effect on the material.After the material reaches rough grinding in the first warehouse, it enters into the second warehouse through a single layer compartment board, which is inlaid with flat lining board and contains steel ball to further grind the material.The powder is discharged through the discharge grates to complete the grinding operation.
Structural features of aerated brick ball mill:
The machine is composed of feeding part, discharging part, rotary part, transmission part (reducer, pinion, motor, electric control) and other main parts.The hollow shaft is made of cast steel, the inner lining can be removed and replaced, the large rotary gear is made of casting hobbing, and the barrel is embedded with wear-resistant lining board, which has good wear resistance.The machine runs smoothly and reliably.
Note: According to the material and the way of discharging, you can choose the dry type ball mill or the wet type grid type ball mill.
Technical parameters of ball mill:
| Model | Cylinder speed(r/min) | Ball capacity(t) |
Material-in size(mm)
|
Material-in size(mm) |
Capacity(t/h)
|
Motor power(kw) | Weight(T) |
| Ф900×1800 | 36～38 | 1.5 | ≤20 | 0.075-0.89 | 0.65-2 | 18.5 | 4.6 |
| Ф900×3000 | 36 | 2.7 | ≤20 | 0.075-0.89 | 1.1-3.5 | 22 | 5.6 |
| Ф1200×2400 | 36 | 3 | ≤25 | 0.075-0.6 | 1.5-4.8 | 30 | 12 |
| Ф1200×3000 | 36 | 3.5 | ≤25 | 0.075-0.4 | 1.6-5 | 37 | 12.8 |
| Ф1200×4500 | 32.4 | 5 | ≤25 | 0.074-0.4 | 1.6-5.8 | 55 | 13.8 |
| Ф1500×3000 | 29.7 | 7.5 | ≤25 | 0.074-0.4 | 2-5 | 75 | 15.6 |
| Ф1500×4500 | 27 | 11 | ≤25 | 0.074-0.4 | 3-6 | 110 | 21 |
| Ф1500×5700 | 28 | 12 | ≤25 | 0.074-0.4 | 3.5-6 | 130 | 24.7 |
| Ф1830×3000 | 25.4 | 11 | ≤25 | 0.074-0.4 | 4-10 | 130 | 28 |
| Ф1830×4500 | 25.4 | 15 | ≤25 | 0.074-0.4 | 4.5-12 | 155 | 32 |
| Ф1830×6400 | 24.1 | 21 | ≤25 | 0.074-0.4 | 6.5-15 | 210 | 34 |
| Ф1830×7000 | 24.1 | 23 | ≤25 | 0.074-0.4 | 7.5-17 | 245 | 36 |
| Ф2100×3000 | 23.7 | 15 | ≤25 | 0.074-0.4 | 6.5-36 | 155 | 34 |
| Ф2100×4500 | 23.7 | 24 | ≤25 | 0.074-0.4 | 8-43 | 210 | 42 |
| Ф2100×7000 | 23.7 | 26 | ≤25 | 0.074-0.4 | 8-48 | 145 | 50 |
| Ф2200×4500 | 21.5 | 27 | ≤25 | 0.074-0.4 | 9-45 | 280 | 48.5 |
| Ф2200×6500 | 21.7 | 35 | ≤25 | 0.074-0.4 | 14-26 | 280 | 52.8 |
| Ф2200×7000 | 21.7 | 35 | ≤25 | 0.074-0.4 | 15-28 | 380 | 54 |
| Ф2200×7500 | 21.7 | 35 | ≤25 | 0.074-0.4 | 15-30 | 380 | 56 |
| Ф2400×3000 | 21 | 23 | ≤25 | 0.074-0.4 | 7-50 | 245 | 54 |
Performance:
-The factory used the advanced equipment to produce, assembly and inspect.
-To ensure high accuracy.
Packing & Shipping:
Package conforms to the requirements of customs.
After-sales service:
1.Provide engineers abroad installation and commissioning service.
2.Held online or site training for workers to ensure the safe operation.
3.Our expert will answer any inquiry within 24-48 hours and it will be solved as soon as possible.
4.We supplies the complete technical documents and the relative drawings of the electric components which were written in Chinese and English.
5.Service is available lifelong.
Our products are sold all over the world, you can rest assured.
