Factory / Woodworking / Boiler / Bag Type, Cartridge Type, Cyclone Dust Collector Free Design Solutions -Dust collector
The dust collector on the top of the warehouse is to collect dust and discharge clean air into the cement tank, so that there is no negative pressure in the warehouse and the storage pressure of the ash warehouse is reduced.When the bulk cement pump truck sends powder to the warehouse, there is a certain pressure difference between the inside and outside of the cement warehouse, the gas is discharged from the warehouse inside and outside, and the dust is filtered by the filter cartridge to achieve the effect of purifying the air.When the screw machine to the use of mechanical feed, the pressure in the bin is less than the atmospheric pressure so that the air to the bin, so that the screw normal work within the scope of application.
Dust collector installation process:
1. When the dust remover equipment is lifted, attention should be paid to avoid damaging the box body and accessories.The aperture of the filling roof must be smaller than that of the dust collector.And welded to the ash storage filling roof.
2. Switch on the induced draft fan.
3. Connect the air compressor and connect the soft connection to the gas storage tank of the dust collector.
4. Before installation, inspect all parts of the dust collector to see if they are in good condition. If missing, damaged or deformed parts are found, repair and repair them before installation.
5. Sealing packing should be inserted between each flange of the dust collector to tighten bolts, ensure reliable sealing of the box body, and prevent air leakage.
6. The filter bag must be fixed vertically in the dust catcher and installed in a compact way, with the bag mouth stuck on the flower plate.
7. The connection of air bag and electromagnetic pulse valve spray pipe should be sealed reliably without air leakage.
Packing & Shipping:
Package conforms to the requirements of customs.
1. Provide engineers abroad installation and commissioning service.
2. Held online or site training for workers to ensure the safe operation.
3. Our expert will answer any inquiry within 24-48 hours and it will be solved as soon as possible.
4. We supplies the complete technical documents and the relative drawings of the electric components which were written in Chinese and English.
5. Service is available lifelong.