Send Message
Jiangsu Sankon Building Materials Technology Co., Ltd. 86-0519-83996829
5621kg W2570mm Hoist AAC Block Cutting Machine

5621kg W2570mm Hoist AAC Block Cutting Machine

  • High Light

    Hoist AAC Block Cutting Machine


    W2570mm Hoist AAC Block Cutting Machine

  • Place of Origin
  • Brand Name
  • Certification
  • Model Number
  • Minimum Order Quantity
  • Price
  • Packaging Details
  • Delivery Time
  • Payment Terms
    L/C, T/T
  • Supply Ability

5621kg W2570mm Hoist AAC Block Cutting Machine

Hoist of finished concrete



The hoist (Refer to the picture) is the back-up equipment for autoclaved aerated concrete cutting machine. It is installed on the automatic billet shift machine and the lifting is controlled by the guide frame. It is an ideal choice for finished concrete transportation, featured of stability, positioning-accuracy and no sway.

5621kg W2570mm Hoist AAC Block Cutting Machine 0


The clamp is composed of a horizon beam, a vertical beam, a guide frame, a guide device, clamp device, a lifting unit and cylinder system. The two beams are made of huge steel pipes, so it is featured of good stiffness, compact structure and it can be easily installed and debug. Lifting device is located on the horizon beam and the guide unit is fixed on the vertical beam.


Technical parameter:

Length 6740 mm
Width 2570 mm
Height depends on the stroke
Weight 5621 kg
Diameter 80
Stroke 150


Working principle:

The clamp can be moved, lifted, clamped and released.


It can be moved axially.


When pulley is hung by hanger, guiding device will move along the guiding frame and then the hoist will go up and down.

Clamp and release

The hydraulic station supplies oil to the cylinder to make the clamping device rotate, the cylinder contracts to clamp, and elongate to release.

When the cylinder contracts and is in a clamped state, the spreader is lifted, so the finished product can be lifted.


Maintenance and repair:


Pleas make sure that the cylinder system is maintained according to its operation manual.

Please remove the dust on the piston rod after work with cotton cloths and make sure it is reset.

To clean up the clamp unit, lifting device, guide unit and make sure that there is no waste left.


Please check all fasteners to avoid any possible loose and change worn parts.