200kg Powder Mixer Semi Automatic Block Making Machine-Aluminium Powder Mixer

Features & Advantages of lightweight aac wall floor panel

1. Lightweight: Aerated concrete density is usually 400-900 kg/m3(according to the market),

which is 1/3 of clay block and 1/5 of common concrete.

2.Fireproof: Most of the major raw materials is inorganic materials, so it has good fire resistance,

and do not emit harmful gases when meet fire

3.Sound insulation: As the material inside has a large numbers of the pores and porous, which

has a good thermal insulation properties.

4.Thermal Insulation: Thermal conductivity is 0.9-0.22 W/(MK), which is 1/4 of clay bricks.

5.Anti-seismic: It can improve the two seismic than the brick level.

200kg Powder Mixer Semi Automatic Block Making Machine-Aluminium Powder Mixer

Application

Semi Automatic Block Making Machine is used for mixing aluminum powder.

Technical parameter

1.Max outside size

Length:630mm   Width:500mm   Height:1142mm

2.Weight≈200kg

3. Motor

Type:Y2-801-4

Power:0.55KW

Rotate speed:1390r/min

Mixing drum capacity:V=0.052m3

4.Mixing speed:1390 r/min

Structure with Semi Automatic Block Making Machine

The aluminum mixer is composed of mixing drum, mixing shaft and motor.

The mixing drum is cylindrical and the bottom shaped like a truncated cone, which is easy to discharge. It is made of steel and the sprue gate is controlled by the pneumatic butterfly valve

The mixing shaft is composed of driven wheel, bearing base and agitator.

Work principle of Semi Automatic Block Making Machine

The aluminum powder mixer is driver by the motor which rotate as clockwise direction, and drag the mixing shaft and agitator, and make the material turn inside the drum, the mixing powder comes down from the sprue gate and it is controlled by the butterfly valve.

Adjust and trial running

1.Adjust the parts below after the installment.

a.Tighten the motor belt.

b.Tighten the gasket screw.

2.Trial running

a.The motor runs stably and rotate as clockwise direction.

b.The mixing drum is stable.

c.The shaft is easy to run, no abnormal sound.

d.The pneumatic butterfly valve well works.

Maintenance and repair

1.Maintenance

Clean the mixing drum and mixing shaft once a week, tighten the gasket of the shaft.

2.Repair

Disassemble the sprue gate and clean it and pneumatic butterfly valve and the pipe once per month.