Application:
It is used for mixing aluminum powder.
Technical parameter:
1.Max outside size
Length:630mm Width:500mm Height:1142mm
2.Weight≈200kg
3.Motor
Type:Y2-801-4
Power:0.55KW
Rotate speed:1390r/min
Mixing drum capacity:V=0.052m3
4.Mixing speed:1390 r/min
Structure:
The aluminum mixer is composed of mixing drum, mixing shaft and motor
The mixing drum is cylindrical and the bottom shaped like a truncated cone, which is easy to discharge. It is made of steel and the sprue gate is controlled by the pneumatic butterfly valve
The mixing shaft is composed of driven wheel, bearing base and agitator.
Work principle:
The aluminum powder mixer is driver by the motor which rotate as clockwise direction, and drag the mixing shaft and agitator, and make the material turn inside the drum, the mixing powder comes down from the sprue gate and it is controlled by the butterfly valve.
Adjust and trial runnin:
1.just the parts below after the installment
a.ghten the motor belt.
b.ghten the gasket screw.
2. Trial running
a.The motor runs stably and rotate as clockwise direction.
b.The mixing drum is stable.
c.The shaft is easy to run, no abnormal sound.
d.The pneumatic butterfly valve well works.
Maintenance and repair:
1.aintenance
Clean the mixing drum and mixing shaft once a week, tighten the gasket of the shaft.
2.Repair
Disassemble the sprue gate and clean it and pneumatic butterfly valve and the pipe once per month.
Safety:
No people is allowed to stand on the top of the mixing drum during the mixing
Clean the flying material after each production shift.
Our products are sold all over the world, you can rest assured.
